Your first week with a 3D printer
Getting started6 min read
The perfect first layer, every time
Bed & adhesion6 min read
Stringing: moisture first, settings second
Print quality5 min read
Drying filament properly
Materials5 min read
Clearing a blocked nozzle without swearing
Maintenance4 min read
What to service and when
Maintenance4 min read
Nozzle sizes: when to move off 0.4mm
Setup4 min read
Bed surfaces compared
Bed & adhesion5 min read
Layer shifting: belts, speed and slack
Mechanical5 min read
Overhangs, bridging and supports that come off
Print quality4 min read
Why your prints snap — and what actually fixes it
Strength5 min read
Dimensional accuracy: what to calibrate and what to ignore
Calibration4 min read
Thermal runaway: what it means and what not to do
Safety3 min read
Getting the most from Hyper PLA-CF
Materials4 min read
Multi-colour printing, honestly
Multi-colour5 min read
Not sure which guide you need?
Tell us what your printer is actually doing and we'll take you straight to the right answer.
Diagnose my printerRather we just fixed it?
We repair all makes of FDM printer from our Swansea workshop — £30 diagnostic and assessment, refunded against the cost of the repair.
Book a repair