• 0

    No products in your basket.

Creality K2 Plus 3D printer, fully enclosed, front view

Creality K2 Plus 3D Printer – Printer Only (No CFS)

£849.00

SKU: CR-K2P-STD Category: Brand:

Description

The Creality K2 Plus is a serious machine. A 350 mm cube of build space, fully enclosed, with a chamber that actively heats to 60 °C — which is the part that matters. Warping and layer separation are what stop most printers from handling ABS, ASA and nylon properly. A heated chamber is how you fix that, and very few machines at this size have one.

This listing is for the printer on its own. If you want multi-colour printing, see our K2 Plus Combo, which includes the CFS unit.

Printer only — what that means

You get the complete K2 Plus printer, ready to print in a single colour, straight out of the box. You do not get the CFS (Creality Filament System) multi-colour unit.

The printer is fully CFS-ready. You can add one later and up to four can be chained together for 16 colours, so nothing is closed off — you’re simply not paying for it today.

Who it’s for

People printing big. Functional parts, jigs and fixtures, enclosures, cosplay pieces, architectural models — anything where you’ve been slicing a design into chunks and gluing it back together. It’s also the right call if you work in engineering filaments rather than colours: a lot of makers genuinely never need multi-material, and skipping the CFS puts that money back in your pocket.

What makes it good

Actively heated chamber, up to 60 °C

Not just an enclosure that traps heat — a real heater that holds the chamber at temperature. This is what makes ABS, ASA and PA-CF print reliably rather than curling off the plate on hour three.

350 × 350 × 350 mm build volume

42.9 litres. Big enough for a helmet in one piece, and big enough to batch small parts by the tray rather than the handful.

600 mm/s and 30,000 mm/s² acceleration

Five step-servo motors with closed-loop FOC control, so the speed comes with position feedback rather than hoping the steppers kept up.

350 °C quick-swap nozzle

Tri-metal, clog-resistant, and changed in seconds without tools. Paired with a dual-gear direct drive extruder that handles flexibles and abrasives.

Full auto levelling, 18 sensors

Strain-gauge levelling with active tilt calibration. You do not touch a bed screw.

Two AI cameras

One on the toolhead, one in the chamber. Failure detection catches a print that’s let go, and you get timelapses out of it as a bonus.

Built-in air purifier

VOC filtration as standard, which matters when you’re running ABS in a workshop, office or spare room.

Specifications

Build volume 350 × 350 × 350 mm
Max print speed 600 mm/s
Max acceleration 30,000 mm/s²
Nozzle temperature Up to 350 °C
Heatbed temperature Up to 120 °C, 5 mm aluminium plate
Chamber temperature Up to 60 °C, actively heated
Extruder Dual-gear direct drive
Nozzle 0.4 mm tri-metal, quick-swap
Flow rate 40 mm³/s (ABS at 280 °C)
Levelling Fully automatic, strain gauge + tilt calibration
Materials PLA, PETG, ABS, ASA, PET, PLA-CF, PA-CF, PPA-CF
Screen 4.3" colour touchscreen
Connectivity Dual-band Wi-Fi (2.4/5 GHz), Ethernet, USB drive
Onboard storage 32 GB eMMC
Slicer Creality Print 5.0
Machine size 495 × 515 × 640 mm
Weight 35 kg

Buying from 3DFLO

We’re an official Creality partner with a real showroom in Swansea, and this machine is in stock here now — not on a container somewhere. You’re welcome to come and see one running before you spend the money.

Every printer we sell goes out with a printed care and maintenance guide, and free access to The Print Doctor, our free fault-finding tool built for exactly this.

If something does go wrong, you talk to us — not an overseas support queue. We service and repair FDM printers in-house, and we stock the filament and spares to keep yours running.

All prices include VAT at 20%. Questions before you buy? Call 07432 675560 or email james@3dflo.com.

Related products